Page 32 - Hydro-Hybrid™
P. 32
HYDRO HYBRID™
Installation
Cloth
®
The cloth configuration is the same as 1/2 of our standard Wave Across . This section will explain the
cloth installation procedure.
Note: Do not install any cloth until all equipment has been installed, turned on and checked for
hydraulic, pneumatic and water leaks.
Locate the following hand tools:
1-1/8” wrench 9/16” socket
5/16” hex wrench work gloves
3/16” hex wrench safety glasses
ladder
Parts Identification
Entrance View
Retainer pin 1-1/8” bolt,
(typical) (remove for cloth installation, typical)
Upper drive arm
Pitman
arm
Lower drive arm
Drive rack Center Passenger side
follower rack follower rack
30 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL253
