Page 27 - Hydro-Hybrid™

HYDRO HYBRID™

Installation

High-Pressure Feed Manifolds

This section will instruct you on how to secure the high-pressure water feeds to the system.
Grip and spin the throat of
the high-pressure hose to a
position that keeps the hose
clear of all obstructions.
Once in the correct position,
hold it as you tighten the nut
of the fitting.
Spin here to position hoses properly

Tighten nut once hose is
properly positioned

See below for correct
hose position

Direction of
Travel

Driver Side, Outside of frame
WRONG! CORRECT!
Hoses make contact with Hoses are clear of all
Secure the 4 hydraulic-type hoses to the all components. obstructions.
fitting (upper and lower) as shown. DO NOT
fully tighten the upper fittings yet.

1MANUL253 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 25