Page 82 - Saber® Installation & Startup
P. 82
INSTALLATION & STARTUP
Chapter 6 Frame and Carriage Assembly
Frame Assembly (Hybrid)
Wall Mount Overview
The Wall Mounts are very flexible in the way thay can be configured to accommodate different bay widths. Review the
two clamp halves below for clarification on the options.
Upper Clamp Half
The Upper Clamp Half can be rotated 180° to fit the multiple hole-patterns in the Lower Clamp Half.
Lower Clamp Half
The Lower Clamp Half has multiple hole-patterns that in conjunctin with rotating the upper half can be configured
many different ways. The images below show the hole-pattern and 3 of the many Upper Clamp possible positions.
Your configuration may vary depending on your site requirements. Moving the Upper Clamp Half closer to the wall
and cutting the Lower Clamp Half to a shorter length may be necessary for narrow bays or when Side Kick® Dryers
are installed. The following page covers options for cutting the Wall mount to a shorter length.
6-20 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290
