Page 77 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 6 Frame and Carriage Assembly

Frame Assembly (Floor Mounted)
For this section you will need four “C” clamps and 3 levels.

Specifications:
· Bay Width Maximum: N/A
· Bay Width Minimum: 12’ - 3’’ (147”)

· Bay Height: 130’’ (For 88’’ of vehicle clearance)
· Bay Length: 32 Feet (384”), this is for a 21’ - 10’’ (262”).
Before installation begins a, measurement of bay width is necessary.

Measure and write down the bay width on the line(s) below.

Bay Width ________ feet ________ inches

Preparing the Crossbeams

The crossbeams ship at a length of 164”. At that size, they can accommodate a bay as
narrow as 14 feet (168”).
When installing in a bay that has a width less than 14 feet, the crossbeams will have to be cut
to a length of 4” shorter than the bay width to accomdate the Leg Clamps and Base Plates.

Leg Clamps and Base Plate Orientation

How the leg is mounted to the head beam is important, follow the instructions in the chart
below to determine how to configure the Oval Leg Mount Clamp and the Leg Base Plate.

Bay Width Leg Mount Clamp Orientation Leg Base Plate Orientation
13 Feet or Greater Facing each other Facing each other

Less than 13 Feet Facing away form Facing away form
each other each other

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 6-15