Page 17 - Wave Across™ Signature® Series

WAVE ACROSS™ Signature ® Series

Installation

Cleaning Material

This section will explain the cloth installation procedure.
Note: Do not install any cloth until all equipment has been installed, turned on and checked for
hydraulic, pneumatic and water leaks.
Locate the following hand tools:

1-1/8” wrench 9/16” socket
5/16” hex wrench Work gloves
3/16” hex wrench Safety glasses
Ladder

Parts Identification
Entrance View

Retainer pin 1-1/8” bolt,
(typical) (remove for cloth installation, typical)

Upper drive arm

Pitman
arm

Lower drive arm
Drive rack Center Passenger side
follower rack follower rack

1MANUL851 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167 -5470 * Ph (248) 349-7010 * Fax (248) 380-9681 13