Page 19 - Wave Across™ Signature® Series

WAVE ACROSS™ Signature ® Series

Installation

Cleaning Material

In order to install the cloth, some disassembly is necessary. Pay attention to how the machine is
taken apart.
1) Loosen the upper locking collar on the drive rack with a 3/16” hex wrench and slide it
over against the flat washer.
2) Loosen lower locking collar of the drive rack using a 5/16” hex wrench.
3) Slide lower locking collar out away from rack and butt it against the plastic end cap.
Side View
Lower locking
collar (typical)

Upper locking collar

Upper drive arm
1-1/8” bolt, 1-1/8” bolt,
(remove for cloth installation, typical) (remove for cloth installation, typical) Shaft
Plastic end bearing
cap (typical) (typical)

Cleaning Material
(typical)

1MANUL851 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167 -5470 * Ph (248) 349-7010 * Fax (248) 380-9681 15