Page 64 - Sudzer® BL & FM
P. 64

®
            SUDZER  BL & FM



            Chapter 4 Sudzer® FM Installation

            Sudzer® FM Utilities

               Electrical Connections: Wall Washers (Light Bars)

                 Note:  For  a  SpinLite  System  the  Wall  Washers  WILL  be  connected  to  a  SpinLite  Lighting  Panel
                       therefore  a  24VDC  Electrical  Power  Supply  WILL  NOT  be  included,  refer  to  the  SpinLite
                       Lighting Panel Manual to make the proper electrical connections for the Wall Washers.

               1)  Included with the Sudzer® FM is an electrical enclosure with a 24VDC power supply to be
                   used to power the Wall Washers, mount this enclosure in the backroom or connect the Wall
                   Washers to a SpinLite Panel if purchased.
               2)  The two electrical wires that are coming out of the cord grips on the passenger side of the Air
                   Plenum are for the Wall Washers. These wires are to be routed and connected to the 24VDC
                   power supply.
                Wire for DS
                Wall Washer                              Note:  Be  sure  to  follow  local  electrical  codes
                                                               when choosing wiring materials and when
                                                               routing electrical wires.


                                                         Note: The Wall Washers should have a separate
                                                               electrical  output  so  that  they  may  be
                                                               programmed separately from the Chemical
                 Wire for PS                                   Delivery Device and the Inline Fan.
                Wall Washer


               3)  For  proper  wiring  inside  of  the  24VDC  Power  Supply  Enclosure  refer  to  the  Wire Diagram
                   provided.
               4)  Connect the 24VDC Power Supply to an output on the car wash controller.
               5)  Locate  the  quick  electrical  connectors  that  are  coming  out  of  the  Wall  Washers  and  Air
                   Plenum.  Apply a small amount of dielectric grease on the socket side of the connectors.
               6)  Connect the electrical plug from the Wall Washers into the electrical receptors coming out of
                   the Air Plenum, as shown in the image below.

                 Electrical                                                       Electrical
                Connection                                                       Connection


                                                                                       Note: Apply a small amount
                                                                                             of dielectric grease on
                                                                                             the receptor side of
                                                                                             the connector and
                                                                                             push the connectors
                                                                                             together making sure
                                                                                             to align them for a
                                                                                             proper seat.
                                                                                          Wall Washer
                                                                                          Air Plenum

               7)  Wrap the connections with electrical tape to protect them from the car wash elements

               8)  Using the controller, turn on the Wall Washers to make sure they are working properly.
            1MANUL026        Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681   4-14
   59   60   61   62   63   64   65   66   67   68   69