Page 63 - Sudzer® BL & FM

®
SUDZER BL & FM

Chapter 4 Sudzer® FM Installation

®
Sudzer FM Assembly
Tunnel Placement
13) Verify the passenger leg is square and plumb in all directions using a level; shims may be
used under the foot plate if necessary.
14) Drill the lag holes in the concrete and use the supplied ½” lag bolts to secure the passenger
foot plate to the floor.

Note: Remember to verify where any underground heat or utilities run so you can be sure to not
drill into them with the hammer drill when making the lag holes.
Note: Do not hammer the lag bolts all the way down at this time, leave room to raise the foot plate
later if necessary.

Passenger Side

Driver Side

½” Lag Bolts

1MANUL026 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 4-13