Page 15 - Funksjoner SCAFFPLANNER - NO
P. 15

Copy Up / Copy Down



               Copy Up and Copy Down will copy all elements belonging to a deck up or down. The step distance on
               the standards is used when copying.
               You are prompted to select two toe boards. Always select the left bay first, then the right bay. All
               bays between the bays of the toe boards will be copied. If you only want one bay to be copied, click
               twice on the same toe board.

               For Copy Up it’s only allowed to select toe boards belonging to the highest deck. And vice versa for
               Copy Down.

               The settings used when building the scaffold is also used when copying. If you need to change the
               settings, for example distance between deck, just open the Build Scaffold dialog, change the settings
               and close.

               Both functions will edit the standards and make sure standard lengths is starting from base plate and
               justified at the top.

               Copy Down will also move the base elements down.

               If the existing ends of the scaffold is not copied, the copied ends will be open. Insert scaffold
               elements manually to cover the ends with ledgers and toe boards.




               Copy Side

               Copy Side will copy all elements belonging to a deck on the bay sideways.

               You are prompted to select the toe board at front of the bay (1) and the standard at the front end
               (2). You can only select bays at the scaffold end.
               Bay length will be the same as the copied bay. New base elements will be added at the new ends.

               Ledgers and toe board at the side end of the copied bay will be moved to the end of the new bay.

               If you need to change the bay length, please use the Shorten/Lengthen function
   10   11   12   13   14   15   16   17   18   19   20