Page 17 - Funksjoner SCAFFPLANNER - NO

Move Up and Move Down

Move Up and Move Down will move all elements belong to the selected deck up or down. The deck
above will then be reduced/increased accordingly. The step distance on the standards is used when
moving.

You are prompted to select a toe board of one of the bays. All bays belonging to the base line which
was used when building the scaffold will be moved.

Move With Up and Move With Down

The Move With functions is working similar as the Move Up and Move Down functions. The only
difference is that all the decks to the top is moved with.

Move Consoles Up / Move Consoles Down

Move Consoles functions moves all consoles belonging to the scaffold up or down. All decks on the
consoles are moved with. The step distance on the standards is used when moving.

You are prompted to select one of the consoles on the level to be moved.

Move Base Plate Up / Move Base Plate Down

Move Base Plate Up and Down will move the base plate according to the step distance on the
standards. Collar and standards are moved with.

Base plates are moved one by one. If you want to move multiple base plates, just press Enter to
repeat the command and select the next base plate. Or select the same base plate if further steps are
to be moved.
Both functions will edit the standards and make sure standard lengths is starting from base plate and
justified at the top.