Page 1069 - Foton Workshop Manual - Auman EST-M

Steering system- Steering Mechanism ST-1

IN
Steering System

Overview DI

1. During driving, it is necessary to change driving directions frequently (i.e. vehicle steering). The
method for it: the driver makes the wheels on the steering axle turn a certain angle in relevant to the Y-line EG
of vehicle through the steering mechanism.
2. When the vehicle drives straightly, the steering wheels may change the driving direction TR
automatically because of the road side interference. At this moment, the driver can turn the
steering wheels to the opposite direction through the steering mechanism so as to recover to to the AX
original direction.

3. The steering mechanism of vehicle mainly includes the steering operating control mechanism, FR
steering device and steering gear.

Precautions ST

1. Before turning over the cab, make sure that the finished automobile is parked on flat roads and the
engine is stopped while transmission is in neutral gear. Then use the parking brake system and close the door. BR
2. Before turning up the cab, make sure that there is no sundries placed in the cab and no personnel
standing in front of the cab. BW

3. Switch off the engine and ignition switch when working under the vehicle
4. During driving, if there are steering noises, sudden ponderosity, or stuck phenomenon, stop EL
immediately for troubleshooting, in order to find the problem and remove it.
5. When the engine is off, prohibit rotating the steering wheel. When the steering wheel is locked, do not
move the vehicle to prevent damaging the steering wheel and other parts.

6. Once the cotter pin is removed, it shall not be reused.
7. During driving, prohibit performing service to any part.
8. During service, if bearings get stuck or loose, replace them.

ST-001