Page 873 - Foton Workshop Manual - Auman EST-M

Transmission and Control Mechanism - Manual Transmission TR-59

IN
b. Install the odometer drive gear.

DI

EG

TR

AX
c. Clean the sealant and seal pads on the face of the
transmission housing to the transmission interface and
install a sealant-coated paper pad. FR

d. Install the rear bearing cover of transmission and
fixing bolts, and tighten them. ST
Torque: 57~75N•m

Caution BR

When installing bolts, apply thread locking glue to the
threads. BW

e. Install the transmission flange and sealing ring and
fix with nuts. EL
Torque: 690~980N•m

Caution
The locknut of flange is a one-time pieces, which must
be replaced.

Danger

After the tighten the nut to the specified torque,
jumping the flange at the locking position of the
nut with a chisel, to prevent the nut from falling off,
causing danger and heavy damage.

10. Install the clutch housing assembly (see "Chapter TR Transmission and Control Mechanism -
Clutch - Clutch housing, Replacement")
11. Fill the transmission oil

TR-059