Page 2399 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-347

Is the inspection result normal?
Yes>To step 3.
No >Replace the rear fog lamp switch.

3. Check the rear fog lamp bulb
62

(a). Check if the LR and RR combination lamp connectors are loose and falling off.
(b). Remove LR and RR fog lamp bulb.

(c). Connect the positive and negative
electrode of bulb into the positive
and negative electrode of the battery,
respectively to check if the bulb will light
up.

Is the result normal?
Yes>To step 4.
No >Replace the bulb.

4. Check the harness disconnection

(a). Ignition switch:"LOCK".
(b). Disconnect connector C16, C56, C58, N02 and N05.

(c). Use a multimeter to measure the resistance
between No. 9 terminal of connector C16
and No. E10 terminal of connector C58.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
C16(9) - C58(E10) ＜ 2Ω

Page 2399