Page 2396 - Foton Workshop Manual - Aumark (BJ1099)

62-344 DIAGNOSIS-LIGHTING SYSTEM

(d). Use a multimeter to measure the resistance
between No. 1 terminal of left rear bumper
combination lamp connector N02 and No.
C8 terminal of connector C56.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
N02(1) - C56(C8) ＜ 2Ω

Is the inspection result normal?
Yes>To step 3.
No >Repair the harness disconnection between connector N02 and C56.

3. Check whether there is disconnection between the harness and the grounding

(a). Ignition switch:"LOCK".
(b). Disconnect the combination lamp connector N02 of the left rear bumper.

(c). Measure the resistance between No. 2
terminal of the connector N02 and the
ground with a multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

N02(2) - Grounding < 2Ω

Is the inspection result normal?
Yes>Find the causes from other symptoms.
No >Repair the open circuit harness between connector N02 and the grounding.

Page 2396