Page 511 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL SYSTEM - LUBRICATING SYSTEM 12C-71

(a). Remove the engine oil filler cap in the
arrow direction.

fuwx12C183

(b). Remove the drain bolt (arrow direction), 12C
and discharge the engine oil into the vessel
(for the longitudinal engine).
NOTICE:
Collect the discharged engine oil into a vessel.

fuwx12C184

(c). Remove the drain bolt (arrow direction),
and discharge the engine oil into the vessel
(for the horizontal engine).
NOTICE:
Collect the discharged engine oil into a vessel.

fuwx12C185

(d). Install a new drain bolt and gasket, and tighten them with the torque of 30±3 N•m.
(e). Fill the engine oil (4.5L).
NOTICE:
•Do not use poor-quality engine oil.
•Do not mix engine oil products of different grades.
(f). 90s after the engine is started, turn off the ignition switch and wait for 60s.
(g). Pull out the engine oil dipstick unit, use the non-woven cloth to wipe it and then fit it
in place. Pull out the engine oil dipstick unit again, and check the engine oil level (for
the longitudinal engine).

Page 511