Page 517 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL SYSTEM - LUBRICATING SYSTEM 12C-77

(b). Remove the oil pan weldment.
PROMPT:
•If the removal is difficult, use a rubber hammer to
knock the part slowly.
•When detaching parts, prevent the bonding face
and adjacent parts from being damaged by
tools.
•Remove these 20 oil pan weldment fixing bolts
(arrow direction).
fuwx12C201 •Remove the oil pan weldment.

4. Install the oil pan weldment (for the 12C
longitudinal engine)
(a). Use the sealant scraper to remove the
residual Loctite sealant 5970 on the
mounting surface of oil pan weldment.

fuwx12C202

(b). Remove the residual Loctite 5970 sealant
on the mounting surface of the oil pan
weldment (for example, use the rotary
plastic brush).
(c). Clean the mounting surface to make sure
that it is free from oil or grease.

fuwx12C203

(d). Cut the tube nozzle at the front mark ( the
nozzle diameter is about 3 mm).

fuwx12C204

Page 517