Page 1886 - Flipbook_SolidDesignSoutheast2020

3 16

10

17

5

7 14 21 15
6

23

12 ANTI-BACKUP BOTTLE 14 BOTTOM-UP FILLING 17 DUAL DISCHARGE SPEED
DETECTOR (Optional): SYSTEM HYDRAULICALLY CONTROL (Optional): 21 FINGER-TIP NOZZLE
If filled containers backup into the REGULATED (Standard): Allows operator to have one or two POSITIONING
nozzle filling area, the filler will auto- When nozzles are automatically discharge fill rates during same fill (Standard-Patented):
matically pause and wait for the jam lowered into the containers initiat- cycle. Permits faster fills for tapered No tools needed for mounting
downstream to clear and then auto- ing the fill cycle, the rate that noz- and long neck containers. or positioning of nozzles.
matically resume the filling cycle. zles rise can be precisely controlled
and operator-adjusted to obtain 22 CLEANING AND PRIMING
optimum performance for the prod- 18 NO BOTTLE — NO FILL SWITCH (Standard):
EASE OF OPERATION uct being filled. This minimizes (Standard-Patented): Pistons (filling units) and nozzles
(Standard): foaming, splashing and eliminates Sensor allows filler to wait until can be cycled for rapid cleaning and
FILLS-ALL® fillers are easy to air pockets for viscous materials. there are bottles under all of the product priming.
set-up and operate. They require no After filling is complete, the nozzle nozzles before initiating the fill
skilled operators. Filling units, elec- rack rises rapidly to allow for faster cycle. Bottles are counted in and out 23 BOTTLE CENTERING
tronics and electrical components cycling. A non-diving nozzle mode to minimize fill cycle time, and GUIDES
are modularized for quick replace- and a fixed preset filling position maximize performance. (Optional)
ment. The filling machines come mode are standard. Available with a fully adjustable
with a two year guarantee—the horizontal comb-type bottle center-
longest in the industry. The Model 15 HOLDING TANK (Optional): 19 MULTI-STROKE COUNTER ing neck locator for applications
VOL-32 FILLS-ALL fillers operate Portable on casters, and fabricated (Optional): requiring exact location nozzle
quietly with only one main moving of stainless steel, this unique design Electronic digital switch allows entry. (See diagram on page 3 and
part. Downtime and maintenance eliminates product waste and is operator to program the number of photo 23 above).
costs are minimized due to available in several sizes including a times the piston pumps will be actu-
little or no changeover parts. standard 30 gallon capacity. Easy to ated, thereby dispensing a larger OTHER ACCESSORIES AND
Disassembles quickly for cleaning or clean and available with options volume of product than would nor- FEATURES (Standard):
can be cleaned-in-place (CIP). mally be possible with any given • Low cost means of filling a wide
such as covers, level sensors, auto- pump size. Typical applications are range of free-flowing to viscous
matic valves, pumps, etc.
filling 16oz. containers with 5oz. liquids • Hazardous location con-
ACCURACY (Standard): pumps or filling 1/2 gallon contain- trols are available • Intermittently
Piston filling units are available for 16 SHUTTLE VALVE FILLING ers with 36oz. pumps. stopping conveyor • Minimal lubri-
accuracies to ±0.5% or better. This UNITS/PISTONS cation required, eliminating down-
insures against underfill and overfill (Patent pending): time due to faulty maintenance •
eliminating product give-away. The FILLS-ALL exclusive shuttle 20 BOTTLE COUNTER Drip pan for hard to handle
Calibrated incremental gauges valve pistons are designed to handle (Standard): products • Compact design —
assure quick changeover and highly viscous products and prod- Digital counter automatically keeps minimal amount of floor space
repeatability. ucts with particulates. The units track of the number of bottles filled. required. • In-case filling capability
clamp together with sanitary seals Can be reset between runs assisting • Nitrogen purging prior to or after
for ease of cleaning and for sensitive operator in determining production filling • Advanced design eliminates
13 CONSTRUCTION (Standard): products. count. the antiquated filling method of
One piece welded stainless steel The Proven Standard ® . . . Since 1941. multiple cams and numerous mov-
frame on swivel casters for portabil- ing parts • Heated molten product
ity. Unique design allows user filling• Custom designs for special
the option of placing filler over applications are also available.
an existing conveyor or its own
optional stainless steel variable
speed conveyor. 200 Mill Road, Riverhead, NY 11901-3125 USA
TEL (631) 727-0300 • FAX (631) 369-5939
www.kapsall.com
7