Page 933 - Icon Ridge Automotive & Truck Catalog

Truckline

Thread Chasing Tool

• For recutting and cleaning of damaged outside threads
• Suitable for left and right-hand threads for metric and inch threads
• Cutting jaws in magazine for quick conversion
• Soft holding and guide jaws for cutting thread without damage
• Flank angle for inch cutting jaws 60°
Application:
• Truck axle drums, hydraulic cylinder fittings, steering rods, etc.
For thread pitches:
• Metric 1/1.25/1.5/1.75/2/2.5/3/3.5
• Inch: 4/5/6/7/7.5/8/9/10/11/11.5/12/14/16/18/20/24 threads per inch

Article No. Article Description QTY
4965 25 140 THREAD CHASER 25-140MM M+" 1

Stud Bolt Recutting Set, Vehicle 5 pcs

• For the cleaning and thread-chasing of wheel studs and wheel nuts
on which the front threads have been damaged
• Contrary to conventional thread chasing, the tool is placed on the
rear thread passes and is the nrotated forwards
• This eliminates the problems of positioning and possibly the chasing
the thread obliquely that can occur with normal thread-tapping tools
• For threads: M18 x 1.5, M20 x 1.5, M22 x 1.5, 7/8“–11 BSF (Scania)

Article No. Article Description QTY
5569 5 THREAD CHAS.KIT STUD BOLTS5PCE 1
Contents:
• Art.-No. 5569 5 1 Drive adapter
• Art.-No. 5569 5 3 Threading die M18 x 1,5
• Art.-No. 5569 5 4 Threading die M20 x 1,5
• Art.-No. 5569 5 5 Threading die M22 x 1,5
• Art.-No. 5569 5 6 Threading die 7/8-11 BSF

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 933