Page 115 - Condition Monitor User Manual

Viewing Measurement Data

• Summary Numbers displayed in blue text indicate a Moderate Alert.

• Summary Numbers displayed in orange text indicate a High Alert.
• Summary Numbers displayed in red text indicate a Very-High Alert.
There is an additional control in the ribbon to copy the summary table to the clipboard
so that it can be pasted into another document.

9.1.5. Measurement View

The Measurement View is used to view the waveforms and/or spectrum of individual
measurements. To open the Measurement View, select the ‘Measurement View’ tab. in the
ribbon.

Figure 9-11 Measurement View
The ribbon will display the controls for manipulating the view:

• In the ‘Graph Type’ section of the ribbon, select which graph to view.
• In the ‘Annotations’ section of the ribbon, select any optional annotations on the
graph.
The measurement list will only show measurements that include raw data.
The measurement and axis or axes that get shown on the graph are selected from the
measurement list:
• Left-click on a summary number cell in the measurement list to graph the data from
that axis.
• Left-click while holding control will add another axis to the graph; this axis must be
from the same measurement. Up to 4 axes can be displayed at the same time for

109
www.irispower.com