Page 90 - Regal ideas Binder_USA_v3

urbanrail ® Installation Instructions

Stair Railing Installation (Continued)

Pre-drill and use URSC50 Proper position of bracket is Repeat the above steps to Measure for rail length and
screws to attach bracket with bottom rail “arc” at top. the other stair posts. cut rails.
flange at this height.
TIP: Pre-drill using 1/8”
(3mm) drill bit when using
URCS50 screws.

Loosen bolts/lags holding Install top rail into swivel Level post Tighten post bolts/ lags
bottom stair post, allowing bracket sleeves
room for top and bottom rails
to slide into bracket sleeves.

TIP: Install bottom rail
first.

Use URCS50 screws (sold Use URCS50 screws (sold Install pickets and spacers Spacing between pickets
separately) to fasten swivel separately) to fasten swivel as described in previous should not exceed 4”
bracket to top rail. bracket to bottom rail. “installing pickets” paragraph
to complete the stair rail
TIP: Pre-drill using 1/8” section.
(3mm) drill bit.

regalideas.com/urbanrail | Toll Free: 1-800-819-4344 | Fax: 1-604-952-4291 | email: sales@regalideas.com 6
V2