Page 138 - AMS Driver Training Manual Version 2 2024

A V O N M A T E R I A L S U P P L I E S L T D ( A M S L T D ) D R I V E R T R A I N I N G M A N U A L V E R S I O N 2

Rigid Tipper Safe Operation

A Rigid Tipper lorry must not be operated unless
you are fully conversant with the vehicles safe
operation and its controls.

To obtain maximum efficiency, and to produce
good fuel economy, the vehicle must be driven in the green band on the rev counter at all
times.

Loading and tipping operations could be a very dangerous manoeuvre unless a great deal
of care is taken during this procedure. There is a high risk of damage to the vehicle and it’s
equipment, property and the health and safety of the driver or the public unless the following
procedures are carried out.

On arrival at the customers premises

Follow all site signage and mandatory instructions
On arrival to the site report to the customer/banksman for instructions to the
unloading point.
Wear correct Personal Protection Equipment at all times when loading/discharging
materials. (Hard hat, safety glasses, high vis clothing, gloves and safety boots)
Always keep far enough away from other vehicles to maintain your safety, if you
have any safety concerns then STOP and speak to either a site operative or your
Operations Manager
Warn any other person who you see approaching your vehicle to keep a safe
distance and Stop if necessary.
If you or other vehicles approach close to you, never proceed until they have
acknowledged your presence, give them a thumbs up and await a response. Never
turn your back on mobile plant always assume you have not been seen.
Make eye contact and get a thumbs up from the machine operator and ensure your
safety.
Do not enter the body of the vehicle for cleaning unless you are in a safe area and
have notified the site staff and your manager. Again notify your manager when you
are back in the cab of your vehicle so we know you are safe.
Carry out a visual check for access, manhole covers, soft verges, condition of siting
area, plus any overhead cables.
Ask non-account customers to sign the disclaimer accepting liability for any damage
caused prior to commencing the operation when off of the highway.

Loading the body

Ensure that the body is clean before loading with a different product.

Page 137 of 197
Reviewed May 2024