Page 1524 - Workshop Manual - Aumark (BJ1051)

76-6
Body turnover/Door/Cargo box-Tilting mechanism of the cab

Replacement

Notice:
· Make sure the vehicle is parked on a flat road and there is enough operative room around and up side of the cab.
· Engage the parking brake lever and use blocks on the wheels as necessary.
· Make shift lever at neutral position;
· There should be no slippery article.
· Close all doors tightly.
1. Tilt up the cab

2. Disassemble the long tie rod assembly
(a). As shown in the figure, disassemble the left side
cotter pin of the long tie rod.
(b). Disassemble the right side cotter pin of the long tie
rod.
Hint:
The steps to disassemble right side cotter pin are same
with that of left side cotter pin.
3. Disassemble the operational mechanism assembly
(a). Loose 3 fixation bolts of the operational mechanism.

4. Disassemble the left lock body assembly
(a). Disassemble 4 fixation bolts of left lock body.
76

5. Disassemble right lock body assembly
(a). Disassemble 4 fixation bolts of right lock body.
Hint:
The steps to disassemble right lock body are same with that of left lock body.

Page 1524