Page 33 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 277 Montag, 10. April 2017 11:05 11

Injection System, PSA

KL-1383-142 K KL-1383-142 K
Injector Nozzle Puller Set, PSA 1.4 8V HDI

Applicable to Peugeot and Citroën 1.4 8V (DV4 - Euro 4 and Euro 5) Diesel
engines; as installed in Citroën C1, C2, C3, DS3, Xsara, and Peugeot 107, 206,
207, 307 1007 etc. (Engine codes: DV4C, DV4TD, DV4TED, 8HR, 8HT, 8HX, 8HZ)
An indispensable tool set for the professional removal of very tight-fitting/seized
injector nozzles without the need for removing the cylinder head from the vehicle.
The KL-1383-142 K injector nozzle puller set allows for the accurate extraction of
very tight-fitting or stuck injector nozzles. The removal of the cylinder head is not
necessary. The special pull spindle with union nut is specifically designed for use on
the above mentioned vehicles to ensure safe and accurate support of the puller tools,
even if injectors are very tight-fitting or seized in place. The use of the special pull
spindle with additional union nut will facilitate the extraction of even the most
stubborn injectors. The injector nozzle needs to be opened for this.
Procedure for Injector Nozzle Removal: Note:
Unscrew injector nozzle head by means of the special socket included in the set. Be sure to read and observe the injector nozzle manufacturer’s directions and
Screw pull spindle into injector nozzle, and, if using the pull spindle with union nut, specifications before re-installing an injector nozzle that had been opened. If
necessary, have the injector nozzle tested and checked by an authorized
additionally screw union nut onto the injector nozzle. Place pre-assembled base tool
workshop.
onto cylinder head and screw on shoulder nut. Extract injector nozzle by evenly
rotating shoulder nut.
Scope of Delivery: KL-1383-142 K Injector Nozzle Puller Set, PSA 1.4 8V HDI
Part No. Description Qty
KL-1383-1400 Base Tool 1
Pull Spindle, M17x1, 132mm long, with Union Nut 1
KL-1383-1112 Shoulder Nut, M16x1.5 1
KL-0369-4505 A Special Bit Insert, (waf) 10mm 1
KL-0369-461 A Special Socket, (waf) 29mm, 1/2" Drive 1
KL-0126-221 Flexible Magnetic Lifter 1
KL-0014-0030 Molybdenum Disulphide Paste 1
KL-1383-1490 Plastic Storage Case with Insert 1

KL-1383-143 K KL-1383-143 K
Injector Nozzle Puller Set, PSA 1.6 8V HDI 6

Applicable to Peugeot and Citroën 1.6 8V (DV6 - Euro 5) Diesel engines; as installed
in Citroën C3, C4, C5, DS3, DS4, Berlingo, and Peugeot 207, 308, 508, 3008, 5008,
Partner etc. (Engine codes: DV6C, DV6CTED, DV6DTED, 9HF, 9HL, 9HP, 9HR)
An indispensable tool set for the professional removal of very tight-fitting/seized
injector nozzles without the need for removing the cylinder head from the vehicle.
The KL-1383-143 K injector nozzle puller set allows for the accurate extraction of
very tight-fitting or stuck injector nozzles. The removal of the cylinder head is not
necessary. The special pull spindle with union nut is specifically designed for use on
the above mentioned vehicles to ensure safe and accurate support of the puller tools,
even if injectors are very tight-fitting or seized in place. The use of the special pull
spindle with additional union nut will facilitate the extraction of even the most
stubborn injectors. The injector nozzle needs to be opened for this.
Procedure for Injector Nozzle Removal:
Note:
Unscrew injector nozzle head by means of the special socket included in the set. Screw Be sure to read and observe the injector nozzle manufacturer’s directions and
pull spindle into injector nozzle, and, if using the pull spindle with union nut, additionally specifications before re-installing an injector nozzle that had been opened. If
screw union nut onto the injector nozzle. Place pre-assembled base tool onto cylinder necessary, have the injector nozzle tested and checked by an authorized
workshop.
head and screw on shoulder nut. Extract injector nozzle by evenly rotating shoulder nut.
Scope of Delivery: KL-1383-143 K Injector Nozzle Puller Set, PSA 1.6 8V HDI
Part No. Description Qty
KL-1383-1400 Base Tool 1
KL-1383-1021 Pull Spindle, M25x1, 132mm long 1
Pull Spindle, M17x1, 132mm long, with Union Nut 1
KL-1383-1112 Shoulder Nut, M16x1.5 1
KL-0369-4505 A Special Bit Insert, (waf) 10mm 1
KL-0369-461 A Special Socket, (waf) 29mm, 1/2" Drive 1
KL-1383-1022 Special Socket, (waf) 25mm, 1/2" Drive 1
KL-0126-221 Flexible Magnetic Lifter 1
KL-0014-0030 Molybdenum Disulphide Paste 1
KL-1383-1490 Plastic Storage Case with Insert 1

Copyright GEDORE Automotive GmbH, Germany
formerly