Page 57 - scales manual v1014 web

OHAUS HP

1. Press and hold CAL/UNITS button until cal weight flashes
2. Press the OFF key, the display will read “AL 0”
3. Place Cal weight on scale, “AL F” will be displayed then read the correct weight.
4. Turn scale off then back on

OHAUS NAVIGATOR

1. Press the SETUP button
2. Press the ENTER button
3. Press ENTER to select “Cal Type SPAN”
4. Press ENTER button
5. Place specified calibration weight on the pan and press ENTER

OHAUS RANGER

1. Slide unlock switch
2. Press and hold G/N/T/Menu until MENU is displayed
3. Press and hold G/N/T/Menu again until SPAN is displayed
4. Press G/N/T/Menu, -0- is displayed followed by calibration mass
5. By pressing PRINT/UNITS, a lesser calibration value can be obtained
6. Place indicated mass on scale and press G/N/T/Menu

OHAUS SCOUT 2

1. Press ZERO/ON until CAL is displayed, then release
2. –C- is displayed, followed by calibration mass
3. Place weight on scale then press ZERO/ON

OHAUS TROOPER

1. Press and hold G/N/T/Menu until MENU is displayed
2. When released, CAL will be displayed
3. Press G/N/T/Menu, SPAN Y is displayed
4. Press G/N/T/Menu, -C- is displayed
5. Place indicated mass on platter
6. Press G/N/T/Menu, -C- is displayed

© 2014 ScaleResource.com Page 57