Page 1091 - 2006 HARLEY FLSTCI SERVICE MANUAL

8.26
Figure 8-68. Turn Signal/Security Module Location

Figure 8-69. TSM/TSSM
TURN SIGNAL/TURN SIGNAL SECURITY MODULE

s0562x8x 7844

TSM/TSSM Configuration

Refer to the Softail Models Electrical Diagnostic Manual for further information on the turn signal module (TSM) and turn NOTE Before replacing turn signal security module (TSSM), verify security lamp is not blinking (vehicle is disarmed). 1WARNING 1WARNING prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) See Figure 8-68. Follow removal instructions under 8.4 Unplug turn signal module connector [30]. See Figure 8-68. Connect turn signal module connector [30]. Follow installation instructions under 8.4 ELECTRI- 1WARNING 1WARNING Be sure that all lights and switches operate pro

signal security module (TSSM). battery cable before proceeding. (00048a). Disconnect negative battery cable. ELECTRICAL PANEL. Connect negative battery cable. result in death or serious injury. (00316a) Test for correct operation. Perform steps listed under or serious injury. (00070a) 2006 Softail: Electrical

GENERAL REMOVAL/ Remove seat. INSTALLATION CAL PANEL. below. Install seat.
HOME 1. To 2. 3. 4. 1. 2. 3. 4. 5. 8-52