Page 814 - 2006 HARLEY FLSTCI SERVICE MANUAL

3.16 4 2 6 6 2 4 3-27

in the sequence shown. Alternately loosen all six rocker cover bolts Figure 3-17. Rocker Cover Bolt Removal 2006 Softail: Engine

REAR
FRONT

Y
TOP END OVERHAUL: DISASSEMBL
d0125x3x 5 1 3 d0125x3x 3 1 5

WRENCH (HD- These tools are especially useful when 3
To perform a complete top end overhaul, follow all steps listed
in this section including inspection and repair procedures.

BREATHER ASSEMBLY CAUTION Dirt caked on cooling fins and other areas can fall into crankcase bore or stick to subassemblies as parts are removed. Abrasive particles can damage machined sur- faces or plug oil passageways. Remove all dirt and parti- cles before disassembly to prevent component damage. Use low pressure spray to thoroughly clean exterior sur- faces of engine prior to disassembly. NOTE See Figure 3-16. If the engine is left in the chassis for service, use the ROCKER COVER 47258) and ROCKER HOUSING WRENCH (HD-47248) to remove the rocker cover and rocker housing bolts, removing the bolts on the left side of the eng

GENERAL respectively. Internal hex External hex Lock patch

HOME 1. ● ● 2. 3. 4. d0124x3x 1. 2. 3.