Page 817 - 2006 HARLEY FLSTCI SERVICE MANUAL

1

1

Front cylinder exhaust push rod Front cylinder intake push rod Rear cylinder exhaust push rod
2 1

3 Figure 3-21. Push Rod Locations Figure 3-22. Lifter Cover

4 Rear cylinder intake push rod 2 Screw with captive washer (4)

10604 1. 2. 3. 4. 7573 1 1. Lifter cover 2.

See Figure 3-23. Following the sequence shown, alter-
for inspection and repair
nately loosen the six rocker housing bolts. Remove
Remove rocker housing and gasket. Discard gasket.
rocker housing bolts and their captive washers.

CAUTION To prevent distortion of the cylinder head, cylinder and cylinder studs, gradually loosen the cylinder head bolts See Figure 3-24. Remove cylinder head bolts. Following the sequence shown, alternately loosen each of the four cylinder head bolts just 1/4 turn. Continue turning the bolts in these increments until Remove the cylinder head bolts. See Figure 3-25. Remove cylinder head and head gas- NOTE Save the cylinder head gasket (if salvageable) and ring dowel O-rings for use with the CYLINDER TORQUE PLATES (Part No. HD-42324-A) when measuring, boring or honing of the

CYLINDER HEAD in the specified sequence. loose. ket (2). Discard gasket. cylinder is required. 3.23 CYLINDER HEAD information. 2006 Softail: Engine

HOME 1. 2. 3. a. b. c. 4. See 5. 3-30