Page 818 - 2006 HARLEY FLSTCI SERVICE MANUAL

3-31
d0127x3x

4 1 1 4 2006 Softail: Engine
Breather baffle hole O-ring 6 5 Breather baffle hole O-ring 5 6 Alternately loosen all six rocker housing bolts in the sequence shown. Figure 3-23. Rocker Housing Bolts

3 2

FRONT 2 REAR 3

such as broken ring pieces, from falling into the crank-
Raise the cylinder just enough to place clean shop tow-
els under the piston. This will prevent any dirt or debris,

CAUTION Exercise caution to avoid bending the cylinder studs. Even a slight bend or nick can cause a stress riser lead- Carefully remove the cylinder. Exercise caution to avoid bending the cylinder studs. As the piston becomes free of the cylinder, hold it upright to prevent it from striking the studs or dragging across the stud thread area. Slide approximately 6.0 in. (152 mm) of plastic tubing, rubber hose or conduit over each cylinder stud. Use material with I.D. of 0.5 in. (12.7 mm) to protect cylinder See Figure 3-25. Remove O-ring seal (4) from the bot- tom of the cylinder liner. Discard O-ring seal. See Figure 3-26. Remove O-

CYLINDER case bore. ing to stud failure. studs and piston from damage. tion.

HOME 1. 2. 3. 4. 5. 6.