Page 820 - 2006 HARLEY FLSTCI SERVICE MANUAL

d0371x3x 3 3-33 2006 Softail: Engine

1
Piston pin circlip remover/installer Protective material over cylinder studs Cylinder deck dowel (O-ring not shown) 2 Figure 3-26. Piston Pin Circlip Removal (Part No. HD-42317-A) Spacer and acorn nut Rubber coated tip 2 Figure 3-27. Piston Pin Remover (Part No. HD-42320-A) Service as needed. See the following topics for inspec- tion and repair information. a. See 3.25 PISTON. See 3.26 UPPER CONNECTING ROD. Complete engine work. If performing a top end overhaul only, see 3.17 TOP END OVERHAUL: ASSEMBLY. If performing a complete engine overhaul, see 3.18 BOTTOM END OVERHAUL: DISASSEMBLY.

1. Piston 2. 3. 4. 3 4 d0129x3x 1. 2. Handle 3. 1 b. a. b.
6. 7.

SPECIALTY TOOL Piston pin circlip remover/installer Piston pin remover Verify that clean shop towels are properly positioned over the crankcase bore to prevent the piston pin circlip 1WARNING 1WARNING Wear safety glasses or goggles when removing or install- ing retaining rings. Retaining rings can slip from the pli- ers and could be propelled with enough force to cause See Figure 3-26. Remove the piston pin circlip. Insert the PISTON PIN CIRCLIP REMOVER/ INSTALLER (1) (Part No. HD-42317-A) into the pis- ton pin bore. Position claw on tool in slot of piston (2) Hold a shop towel over the piston pin bore in case a circlip should fly out duri

HOME PISTON PART NO. HD-42317-A HD-42320-A 1. from falling into the crankcase. serious eye injury. (00312a) 2. a. (directly under circlip). b. 3. No. HD-42320-A). a. b. c. side of pin bore. d. pin is pulled free of bore. 4. in. (25.4 mm) to prevent damage. 5.