Page 815 - 2006 HARLEY FLSTCI SERVICE MANUAL

d0126x3x

3 2 2 3

Breather assembly bolts (2) Breather assembly bolts (2) Alternately loosen all four rocker arm bolts a 1/4 turn in the sequence shown. Figure 3-19. Breather Bolts and Rocker Arm Bolts

d0126x3x FRONT 1 4 REAR 4 1

rod cover). While pushing down on spring cap, rotate bot-
- Remove spark - Remove spark
See Figure 3-18. Insert the blade of a small screwdriver
into cast loop of spring cap retainer (at top of upper push
ROCKER ARM SUPPORT PLATE

Repeat step on second push rod cover. tom of screwdriver toward outboard side to remove. Figure 3-18. Removing Spring Cap Retainer Collapse upper and lower push rod covers. CAUTION Removing the rocker arms with the valve train loaded can result in bent push rods, damaged bushings or a To remove the rocker arm support plate, both lifters of the cylinder being serviced must be on the base circle (or lowest position) of the cam. To find the base circle, it is first necessary to rotate the engine. Based on the level of disassembly required, three methods of engine rotation are presented below. With primary cover installed plugs. With ve

HOME 1. d0147x3x 2. warped support plate. 3. a. b. 3-28