Page 844 - 2006 HARLEY FLSTCI SERVICE MANUAL

s0234x3x 3-57
Figure 3-74. Sprocket Shaft Oil Seal Installer

(Part No. HD-39361-A) Figure 3-75. Leakdown Test
1 2 2006 Softail: Engine

1

Oil seal installer Leakdown tester Chain guide oil passage

7461 7453 1
1. 1. 2.

Wear
bearing, large flat washer and handle from SPROCKET
See Figure 3-74. Install new oil seal using pilot, Nice
Verify that seal lip garter spring is in place on both
SHAFT BEARING TOOL (Part No. HD-97225-55B).

sides of seal. Thread pilot onto sprocket shaft until contact is made with shoulder. With the lettering facing outside, slide oil seal over pilot until it contacts bearing bore. Set SPROCKET SHAFT OIL SEAL INSTALLER (1) (Part No. HD-39361-A) over pilot until it contacts oil seal. Slide Nice bearing and large flat washer over pilot until contact is made with seal installer. Thread handle onto pilot shaft. Rotate handle in a clockwise direction until oil seal installer makes firm contact with crankcase stator mount. Remove handle, flat washer, Nice bearing, seal installer and pilot from sprocket shaft. Slide sprocket shaft spacer over end of

HOME 14. a. b. c. d. e. f. g. h. 15. ing cone. 16. a. b. c. ● ● d. e.