Page 849 - 2006 HARLEY FLSTCI SERVICE MANUAL

Sprocket Punch Marks Figure 3-85. Verify Alignment of Crank and Rear Cam 2 3 4 Rear sprocket bolt (large) and flat washer Crank sprocket bolt (small) and flat washer Figure 3-86. Sprocket Bolts

1 Rear cam sprocket Crank sprocket

f2138x3x F2141x3x 1. 2. 3. 4.

Apply a light amount of clean H-D 20W50 oil to splines on rear cam. Install the primary cam Place the rear cam sprocket (3) in the cam chain. Hold the sprocket allowing the chain to hang loose. Rotate the sprocket so that the punch mark on the NOTE To maintain the original direction of rotation, verify that the colored mark placed on the chain link and crank sprocket is Place the crank sprocket (5) in the opposite end of the chain with the punch mark on the sprocket tooth Maintaining the position of the sprockets on the chain with the punch marks in alignment, start the rear cam sprocket onto the end of the rear camshaft. Note that the sprocket has

Figure 3-84. chain and sprocket assembly. sprocket root faces straight downward. facing opposite the cam support plate during installation. facing straight upward. crank sprocket. Figure 3-85. punch marks are in alignment. ets will make the engine run erratically. with the proper sized thread chaser. 2006 Softail: Engine

See a. b. c. d. See shaft.
HOME 13. 14. ● ● 15. 3-62