Page 850 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 850

3-63





                                                             Figure 3-87. Cam Cover Gasket                                                                       2006 Softail: Engine

















               d0388x3x




                                             TOOL (Part No. HD-42314) between the
                                                 “Cam” to
              Apply oil to bottom of new rear sprocket bolt head and
                washer (1). Loosely install bolt (large) with flat washer to
                  secure rear cam sprocket (2) to end of camshaft.
                                                 “Crank” and







                     NOTE Both crank and rear cam sprocket flange bolts are specially hardened while the flat washers are of a special diameter. Therefore, use only genuine Harley-Davidson parts when replacement is necessary. If new flange bolts are not avail- able, thoroughly clean threads and apply a small amount of THREADLOCKER 262 (red) before installation. The crank and rear cam sprocket flange bolts and flat wash- Position the CRANKSHAFT/CAMSHAFT SPROCKET crank and rear cam sprockets to prevent rotation. The  Tighten both bolts (1, 3) to 15 ft-lbs (20.3 Nm). Loosen both bolts one revolution (360 degrees). Final tighten the rear cam sprocket bolt (1) to 34 ft- Fin

                                       ers are not interchangeable.  LOCKING   handle of the tool is stamped  ensure proper orientation.   lbs (46.1 Nm).  (32.5 Nm).  injury could occur.  sprockets.  with those in the crankcase flange.









          HOME  16.                LOCTITE   17.      a.   b.   c.   d.   e.                    18.       19.  20.
   845   846   847   848   849   850   851   852   853   854   855