Page 848 - 2006 HARLEY FLSTCI SERVICE MANUAL

3-61
f2142x3x MM 7.29 7.54 7.80 8.05 8.31 8.56 2006 Softail: Engine
Figure 3-83. Check Alignment of Crank and

Rear Cam Sprocket Faces 3 5 4 Rear cam sprocket bolt (large) and flat washer Crank sprocket bolt (small) and flat washer Figure 3-84. Cam Support Plate Assembly Table 3-4. Rear Cam Sprocket Spacers IN. 0.287 0.297 0.307 0.317 0.327 0.337

6 Rear cam sprocket Crank sprocket Primary cam chain tensioner PART NO. 25722-00 25723-00 25721-00 25719-00 25717-00 25725-00
2
Link
F2141x3x 1 1. 2. 3. 4. 5. 6.

performing one of the following steps. nate endplay. with the next larger size inventory. spacer with the next smaller size only.
NOTE Crankshaft and rear camshaft endplay can be removed by Rotate engine stand so cam compartment is pointing upward. Push on crankshaft and rear camshaft to elimi- Install compensating sprocket assembly to pull the crankshaft to the left side of the engine. Push on crank- shaft and rear camshaft to eliminate endplay. Remove crankshaft and rear camshaft end play. Place a straightedge across the crank and primary cam sprocket faces. Try to insert a 0.010 inch feeler gauge between the straightedge and each sprocket face. See Figure 3-83. If the feeler gauge does not fit at either location, then proceed to step 12(f). Refer to Table 3-4. On the other h

HOME ● ● d. e. f. ● ● ●