Page 44 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual
P. 44
The counter should be installed so that the 2.7.1 Internal Welcome and Collect Specification
face of the tiles are flush with the face of the Collect Text
adjacent MDF wall.
2mm flat cut aluminium to the agreed secondary
The counter top / shelf (in midnight blackstone) font. All edges to be cleaned down to remove
should be installed to provide an equal sharp edges and burrs prior to powder coating
overhang on the customer and bake and serve RAL9016 white.
sides (total width of shelf = 285mm). Full height of the vertical arrow 670mm. Full
height of the vertical ‘Collect’ text 652mm.
The sneeze glass is to be secured in position Text to have 10mm studs welded to the rear,
in recessed channels. The base channel is complete with drilling template for securing to
recessed within the slap table front and the the counter by way of drilled holes filled with
head channel is fixed flush within the suspended silicone.
ceiling. A side location channel should also be Text has an overall width of 70mm with the arrow
set within the white (feature) wall tiles. head 43mm wide.
Setting Out
Arrow head to be positioned 75mm down from
the underside of the counter, with the ‘C’ of
Collect set 96mm down.
Arrow head point inset 60mm from the left-hand
side of the black laminate.
Welcome Text
Constructed as for the Collect text having an
overall height of 70mm and a total length of
482mm, powder coated RAL9016. Top of the
text to be set 75mm down from the underside
of the counter.
Arrow head manufactured as for the Welcome
text having an overall length of 495mm with a
43mm wide arrow head and 20mm tail powder
coated black for use either pointing left or right.
Text comes complete with drilling template for
installation as the Collect text.
2.7 Counters 30 May 2018
2.7.1 Internal Welcome and Collect Specification 30 May 2018
