Page 566 - Med Plaza and Cancer Center
P. 566

Operation



                 Monitoring Mode


                Multi-Signal Module:
                Multi-Signal modules monitor up to five
                dry-contact switches.
                 • If the signal is normal (switch contacts
                   closed), green indicator for signal is
                   illuminated.
                 • If an alarm occurs (switch contacts
                   open), audible alarm activates and red
                   indicator for signal flashes.                             Front panel
                                                                             TEST button
                 •  When front panel alarm MUTE
                   button is pressed, audible alarm is
                   silenced.  Alarm indicator remains             Digital Display Module:
                   illuminated, but does not flash.
                                                                  Press and hold the front panel TEST but-
                 • Visual indicator will remain illuminated       ton for five seconds to initiate the following
                   as long as alarm condition remains.            sequence:
                 • If audible alarm repeat time has been            • Audible alarm sounds briefly as TT EE SS TT  is
                   set, audible alarm will reactivate, and
                                                                      displayed.
                   visual indicator will again flash after
                                                                    • All LED display segments and LOW,
                   specified time.                                    NORMAL, and HIGH indicators flash for
                                                                      five seconds (firmware up to revision
                                                                      1.0.3).
                                    SIGNAL 1                        • LED display segments and LOW,
                                                                      NORMAL, and HIGH indicators illuminate
                                    SIGNAL 2                          in sequence (firmware revision 1.0.4 and
                                                                      later).
                                    SIGNAL 3                        • Firmware revision (e.g. 11.. 00.. 66) is displayed
                                                                      for two seconds.
                                    SIGNAL 4                        • AA  DD  DD  RR is briefly displayed and then  current

                                                                      MEGA network module address is
                                    SIGNAL 5                          displayed for two seconds.  (Factory default
                                                                      address is 00).
                                                                    • Current units of measure setting (e.g. PP SS II)
                                                                      is displayed for two seconds.
                                                                    • LL  OO is briefly displayed, LOW alarm indicator
                                                                      is illuminated, and current low alarm set
                 Testing                                              point is displayed for two seconds.

                                                                    • KK  ,, is briefly displayed, HIGH alarm
                Periodic testing of alarm system is                   indicator is illuminated, and current high
                recommended.  Digital display modules                 alarm set point is displayed for two
                and multi-signal alarm modules have built-            seconds.
                in self-test modes.  Front panel TEST               • Module returns to monitoring mode.
                button will initiate self-test mode on all
                alarm panel modules at same time.



                                                                                                                 41
                                                                                            Part No. 6-847684-00 Rev. E00
   561   562   563   564   565   566   567   568   569   570   571