Page 483 - Womens Pavilion
P. 483
TotalAlert Infinity™ NFPA Medical Gas Notification System
B = [Gas Text] Tab
Figure 86: Gas Text Tab Figure 88: Configure Source Badges
To change the name of the gas: Touch the A = [Location] Tab
1. Touch the B = [GAS TEXT] tab (Figure 84).
2. Touch the Erase button on the keyboard
to delete the gas name.
3. Enter the new gas name. Touch the [<ÁÑ]
to toggle to symbols. Touch the [1AZ] key
to toggle back to letters and numbers.
4. Touch the Save button.
• Locations Tab
Figure 89: Location Tab Screen
On the SOURCE LOCATION screen:
Touch the 01 tab.
1. Using the keyboard, enter the name of the
location for the source equipment being
monitored (e.g., ROOM 1). Enter multiple
locations as needed (e.g., Manifold Room,
Roof Top, Source Room).
Figure 87: Locations Tab 2. Touch the Save button. A check appears
To select the number of locations to be moni- when the location is saved. Note: To edit
tored for this particular gas: the location, touch the Pencil button.
1. Touch the LOCATIONS tab on the configu- 3. Touch the X button to close and return to
ration screen (Figure 84). the CONFIGURE (SOURCE) screen.
2. Using the [+] and [-] buttons to increase
and decrease the number of locations.
3. Touch the 01 button to go the CONFIG-
URE (SOURCE) screen to configure the first
location (Figure 88).
4107 9016 58.02 4-16
