Page 137 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 9 Optional “Add-On” Items

Bug Spray Applicator

6) The water line required for the Bug Spray Applicator option is 3/4’’ water hose. An 8 ft section is provided to run
from the end of the Bug Spray Applicator nipple to the Bug Spray Applicator manifold, but there is not a piece
provided to run from the Asco™ valve to the end of the Bug Spray Applicator nipple. The Bug Spray Applicator
hose should never run across the floor of the bay. If the Asco™ valve and the Pulsatron™ pump are mounted
onto the passenger’s side of the bay, then the hose will need to be plumbed up and over the top of the machine
and to the other side of the bay. This will prevent the line from being worn out by cars running over it constantly.
Run this line to the straight hose barb at the end of the Bug Spray Applicator nipple and crimp this line onto the
nipple. Then from the barbed hose elbow on the nipple, run the 8 ft piece to the Bug Spray Applicator manifold
along the floor.

7) Flush the lines for a couple of minutes. Next tighten the nozzles into the Bug Spray Applicator manifold. Then
prime the chemical pump. The manifold should now be completely hooked up.

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9-5