Page 191 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 9 Optional “Add-On” Items

HydroBlade® Rinse / Sealer Wax Assembly

Installation
13. Located just above the All Purpose Manifold is the Wheel Cleaner Feed Assembly and the HydroBlade®
Feed Assembly. You will be working with the HydroBlade® Feed Assembly which is the upper most of the
two manifolds as pointd out below. HydroBlade®Low Pressure Feed Kit

Upper HydroBlade® Feed Manifold

14. Run a piece of 1/2” airline that you previously removed from one of the pods from the elbow in the Asco™
Valve to the straight fitting in the brass Tee. Make sure that the 1/2” airline is not positioned in any way that it
can become cut and/or kinked.
Install 1/2” Airline

15. You can now shut the exit utility cover, power up the machine, and run a test wash to verify that there are no
leaks and that all connections are tight.

See Nozzle Chart later in this chapter for more details.

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 9-59