Page 77 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 4 Frame and Carriage Assembly

Mounting the Cylinders to the Entrance Arms

1) Locate the Entrance Arm Cylinder Assembly housed inside of the side-pod and remove the
shoulder bolt, flat washer, two 1/2” plastic washers and the lock-nut from the clevis.
2) Position the Arm Mount onto the Cylinder Clevis as shown below. Be sure to align the Cylinder
Clevis on the tab of the Entrance Arm.

3) Secure the cylinder into place using the removed fasteners while making sure the bolt is facing
up and the white plastic washers are in place.
Lock-Nut Must Be on Top
to Prevent Interferance
Lock-Nut
Flat Washer

White Plastic Washers

Shoulder Bolt

4) When completed, the assembly should appear as shown below.

5) Perform this process on both entrance arms.

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 4-35