Page 79 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 4 Frame and Carriage Assembly

Mounting the Entrance Arm Accessories

3) Take the upper shaft with the bearing and collar on it and slide it onto the entrance arm that you
are working on. Secure the bearing with the two provided 9/16-12 x 1-1/2” bolts and the two
Torque Plate Studs. Tighten down completely as shown below.

Confirm
orientation of
Torque Plate
Studs on the
arms. They
should always
be facing IN

Torque Plate Stud
Before After

Torque Plate Studs on all four
arms should be facing IN

4) Slide the second bearing on to the bottom of the upper shaft with the flat side facing upward.
Secure it to the arm with the four provided 9/16-12 x 1-1/2” bolts. Tighten down completely. Now
tighten the two set screws on the bearing completely.

Before After

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 4-37