Page 24 - SideWinder®

®
SideWinder

Installation

Loading ShineMitt™ Material on Upper Hubs

4) The ShineMitt™ on the driver side and passenger side SideWinders® are to face in opposite
directions of one another. Before loading the ShineMitts™ orient them so that the cleaning
fingers face in the directions specified in the images below.

Overhead View of
Upper Hub Fill Pattern
(7” diameter hub)

For the Upper Hubs, fill all of the slots in
each of the Hub Skin Sections, as
shown.

Make sure that the fill is facing in the
Driver Side correct direction on both driver and Passenger Side
passenger side hubs.

5) Insert the ShineMitt™ into every slot of the Upper Hubs, as shown in the image above.
6) Make sure to slide the ShineMitts™ all the way down to the bottom of the slot.
7) Repeat Steps 3 thru 6 until the Upper Hubs on each SideWinder® assembly has seven rows
with eight (8) ShineMitts™ per row.

111053 (Qty. 8 per Hub)
22” - 45 DEG

111053 (Qty. 8 per Hub)
22” - 45 DEG

111053 (Qty. 8 per Hub)
22” - 45 DEG
Upper Hub: 110998
Diameter: 7” 111053 (Qty. 8 per Hub)
Height: 42 “ 22” - 45 DEG

111053 (Qty. 8 per Hub)
22” - 45 DEG

111053 (Qty. 8 per Hub)
22” - 45 DEG

111053 (Qty. 8 per Hub)
22” - 45 DEG

8) Reinstall the Hub Caps onto the Upper Hubs.

22 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL955