Page 20 - SideWinder®

®
SideWinder

Installation

Tunnel Placement
10) If the units are to be staggered, place the passenger side SideWinder® so that the front
edge of its base plate is 143” from the back edge of the driver side SideWinder’s® base
plate. Also, the outside edge of the passenger side base plate should be 174” from the
outside edge of the driver side base plate. Refer to the image below.

Passenger Side
SideWinder®

Driver Side
QuickFire® Plus

143” Passenger Side
QuickFire® Plus

Driver Side
SideWinder®

DIRECTION
of
TRAVEL

64”
174”
®
11) When the SideWinders® are staggered 143” the Belanger QuickFire® Plus assemblies can
be installed staggered and next to the SideWinder® assemblies in the tunnel, as shown
above. This staggered dimension may vary based on the surrounding equipment.
12) Once the passenger side SideWinder® is in place make sure the unit is level and free from
obstruction then lag it to the floor.

18 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL955