Page 131 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 7 Pumping Station / Solution Delivery Module (SDM)

This section will explain all feeds to and from the SDM. Some items may differ from your site. See
your site-specific prints for details. The three 3/8” chemical feeds shown below should always face the
exit of the Carriage.
Note: If your have purchased the optional MixStir® Triple Foam, refer to the MixStir®
Triple Foam Option chapter in this manual and your supplied MixStir® manual
for more details and connections.

SDM Connections (XR-Package)
3/8” clear poly-flow
Foam Wax to XR-Manifold (typical)
Injector Valve (typical)

PVC Check Valve (typical)
Drying Agent
Gate Valve (typical) 3/4” blue water hose to Wall Manifold

Sealer Wax or Optional Foaming Wax
3/4” blue water hose to Wall Manifold
Presoak
3/4” blue water hose to
Pressure relief valve Heat Vessel / Wall Manifold
3/4” blue water hose to Drain

Solenoid Valve (typical)
3/4” water feed from Distribution
Manifold Assembly

SDM Electrical
Distribution Block

Triple
Foam Triple
Chemical Foam
1 Chemical Triple
Foam
2 Chemical
3

Presoak 1
1/2” clear
poly-flow to
Wall Space for Sealeer Space for
Manifold Drying Wax or Presoak 2
Agent Optional 1/2” clear poly-
Foaming flow to Wall
Wax Manifold

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 7-7