Page 135 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 8 Wall Manifold / Optional Water Heater

Single Pumping Station Wall Manifold Overview Foam-X /
Foaming Sealer
Wax Air Option
(Plugged if not
selected)

Presoak
Foam Air
Foam-X / Foaming
Sealer Wax
Chemical / Water
Bell Reducer with Internal Mixture
Filter Screen (Filter Screen
MUST be flushed out Supply from High-Pressure
Presoak 2 periodically to keep system Lexair™ Valve (1” field
Chemical running properly) supplied Hydraulic Hose
Capable of 2000 PSI
Presoak 1 Maximum Rating or Greater)
Chemical
Presoak Water

Purge
Air

R.O.
Feed
Drying
Agent

Feed to Thru-Wall Kit / Boom
(3/4” field supplied Hydraulic Sealer Wax (This port is

Hose Capable of 2000 PSI plugged if Foaming Sealer
Maximum Rating or Greater) Wax Option is selected)
Wall Manifold Mounts to the
Wall with 3/8” Wall Lags or 3/8”
Threaded Rod Thru-Wall and
Washer Plates

= More details on the Next page

CAUTION

Be sure to install flexible hydraulic hose between the Wall Manifold and the piping that goes to
the boom to make it possible to service if needed.

Note: All hydraulic hoses should be rated at 2000PSI or greater.

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 8-1