Page 71 - Saber® Installation & Startup

INSTALLATION & STARTUP

Chapter 6 Frame and Carriage Assembly

Frame Assembly (Wall Mounted)
For this section you will need four “C” clamps and 3 levels.

Specifications:
· Bay Width Maximum: 17 feet (204”)
· Bay Width Minimum: 12’ - 3’’ (147”)

· Bay Height: 130’’ (For 88’’ of vehicle clearance)
· Bay Length: 32 feet (384”), this is for a 21’ - 10’’ (262”).
Before installation begins a, measurement of bay width is necessary.

Measure and write down the bay width on the line(s) below.

Bay Width ________ feet ________ inches

Preparing the Crossbeams

The crossbeams ship at a length of 164”. At that size, they can accommodate a bay width up
to 17 feet (204”) and as narrow as 14 feet (186”).
When installing in a bay that has a width less than 14 feet, the crossbeams will have to be cut
to a length of 4” shorter than the bay width to accomdate the Mall Mount Clamps.

1MANUL290 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 6-9