Page 1294 - Foton Workshop Manual - Auman EST-M

BW - 56 Body - Windshield, window glass, rearview mirror

c. Place the glass suction disc onto the rear windshield and
turn the switch on the suction disc on, to ensure that the
suction disc can suck the windshield.
Caution
The rope end for glass seal installation should be located
in the cab.

d. Two persons work together to install the rear windshield
into the back window of the cab and adjust the glass to the
center of the back window.

e. Hold the glass from the outside and pull the rope from the
inside to center of the glass to install the glass seal into body
flange.
Caution
Do not distort the seal, or must fit it with the
rear window to prevent water leakage.

f. A person forces the rear windshield, while the other taps
the glass edge, to allow the full contact between the body
flange and the seal.
g. Remove the glass suction disc.

BW-056