Page 1662 - Foton Workshop Manual - Auman EST-M
P. 1662
EL - 238 Electrical system –circuit
IN System description:
When the ignition switch is at the ON/ST position, the current flows to the pin 85 of the relay R15 in the
DI instrument panel fuse box IG2. Then it goes through the coil and is earthed at pin 86 of the R15; the coil is
powered up to generate magnetic field that makes the contracts closed. The battery current goes through the
fuse F\L3 in the vehicle frame fuse box to the fuse F06 in the instrument panel fuse box, then to the pin 30 of
EG
the IG2 relay R15. After passing the contracts, it is output from pin 87 and goes through the fuse F06 in the
vehicle frame fuse box to the pin 2 of the dryer F046, then is earthed at pin 1. Now the dryer starts to work.
TR : Part position
Number Refer to harness Number Refer to harness
AX
F046 Frame harness B100 Body harness
FR F101 Frame harness
: Connector between harnesses
ST
Number Number Refer to harness (connector position)
Body harness and frame harness (instrument
BR B026 F005
panel left lower, close to the clutch pedal)
: Grounding
BW
Number Grounding point position Number Grounding point position
EL F012 Frame harness grounding B007 Body left side ground point 1
EL-238
