Page 2179 - Foton Workshop Manual - Aumark (BJ1099)
P. 2179
DIAGNOSIS-POWER DOOR LOCK 62-127
5. Check the harness and the connector ( body controller-central lock position switch)
(a). Disconnect the connector J10 of the central
locking switch.
62
(b). Disconnect the connector C58 of the body
controller.
fuwx62302
(c). Measure the resistance between the No.2
pin of the connector J10 on the central
locking switch and the No.D6 pin of the
connector C57 of the body controller with
the multimeter.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter
J10 (2) - C57 (D6) ＜ 2 Ω
Page 2179
