Page 2182 - Foton Workshop Manual - Aumark (BJ1099)

62-130 DIAGNOSIS-POWER DOOR LOCK

Is the result normal?
Yes>To step 9.
No >Replace the body controller.

9. Check the harness and the connector ( body controller-the driver door locks)

(a). Disconnect the driver door locks connectors J07.
(b). Disconnect the connector C58 of the body controller.

(c). A multimeter is used to measure the
resistance between the No.3 and No.5
pin of the driver door locks connector J07
and the No.15 and No.30 pin of the body
controller connector C58.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
C07 (3) - B58 (E15) ＜ 2 Ω

C07 (5) - B58 (E30) ＜ 2 Ω

Is the result normal?
Yes>To step10.
No >Repair or replace the harness.

10. Check the driver door lock

(a). Disconnect the driver door locks connectors J07.

Page 2182